• Wear-Resistant Aluminum Bronze Alloy
  • Wear-Resistant Aluminum Bronze Alloy
  • Wear-Resistant Aluminum Bronze Alloy
  • Wear-Resistant Aluminum Bronze Alloy
  • Wear-Resistant Aluminum Bronze Alloy
  • Wear-Resistant Aluminum Bronze Alloy

Wear-Resistant Aluminum Bronze Alloy

Material: Cual
Transport Package: Plywood Case
Trademark: WLVM
Origin: China
Samples:
US$ 200/Piece 1 Piece(Min.Order)
| Request Sample
Customization:

Contact Supplier

Gold Member Since 2020

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

HS Code
8454909000

Product Description

The increase in the Al and Fe content results in a material in which the hard gamma 2 phase (about 400 HB) is present. By proper metallurgical control this hard constituent is uniformly distributed giving this alloy its ability to resist wear.
Mechanical and physical  Units
Nominal value
Tensile strength R m MPa  793
Specified non-proportional extension strength R p0.5 MPa  407

Elongation after breaking A
% 10

Brinell hardness
HBW 10/3000 228

Rockwell hardness
HRB 98

Reduction of area Z
% 8

Compressive strength R mc
Mpa 1069

Specified non-proportional compressive strength R pc0.1
Mpa 441

Compression ratio limit R pc
Mpa 338

Shear strength R cm
Mpa 427

Elastic modulus E
Gpa 110

Charpy shock absorption energy AK
J 11

Izod impact absorption power AK
J 16.3
Fatigue strength (100'000'000 times) σN Mpa 248

Density ρ
g / cm³ 7.45

Coefficient of linear expansion α
10-6 / K 16.2

Thermal conductivity λ
W / m · K 59

Conductivity γ
m /  Ω· mm² 7.5

Conductivity
% I.A.C.S. 13

Specific heat capacity cp
J / g · K 0.42

APPLICATIONS 
This product  is used for guide port bushings and wear strips replacing hardened steel and for some cams when no impact is involved. However, the largest single use is as die rings, inserts, forming rolls etc. in forming, bending or drawing operations, especially when stainless steel is the material being processed. This product is also widely used as work support blades for the centreless grinding of steel rods
Chemical composition
Al:10.5%   Fe:3.5%  Other:Up to 0.5%    The rest is copper
Wear-Resistant Aluminum Bronze Alloy
Wear-Resistant Aluminum Bronze AlloyWear-Resistant Aluminum Bronze AlloyWear-Resistant Aluminum Bronze AlloyWear-Resistant Aluminum Bronze AlloyWear-Resistant Aluminum Bronze AlloyWear-Resistant Aluminum Bronze AlloyWear-Resistant Aluminum Bronze Alloy
 

Send your message to this supplier

*From:
*To:
avatar Miss Wendy Yang
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Contact Supplier

Gold Member Since 2020

Suppliers with verified business licenses

Manufacturer/Factory
Registered Capital
73000000 RMB
Plant Area
>2000 square meters